Fine Beautiful Tips About How To Clean Feed Rollers

Learn how to clean the pickup rollers and separation pad in the document feeder on hp enterprise and laserjet pro multifunction printers.

How to clean feed rollers. Confirm the following message, and click 'ok'. The roller cleaning dialog box opens. Select rear tray or manual feed tray, and then.

The roller cleaning dialog box opens. (4) confirm the displayed message, and click ok. Press the down arrow key to select the appropriate roll and press enter.

Locate the feed roller at the back of the tray. Remove the paper tray and feel around the top of the cavity to find the rollers. In this case, clean the paper feed roller.

Make sure paper feed rollers have stopped rotating, and then load. Clean the paper feed rollers with paper. Click roller cleaning on the maintenance tab.

Gently push out on the clip to unlock the roller, rotate the roller up, and then pull the roller off. Inkjet printers usually have printer rollers located on the bottom, above the paper tray. Remove all sheets of paper from the rear tray, then click 'ok'.

Click the 'maintenance' tab and click 'roller cleaning'. Try not to slide the gray rollers back and forth as this can cause a. (2) click ' roller cleaning.

The paper feed roller will rotate as it is cleaned without paper. Open the printer driver setup window. (1) click the maintenance tab.

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams. Clean the paper feed rollers with paper: The paper feed roller will rotate as it is cleaned without paper.

Select rear tray , and click ok. If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. These rollers help rotate the paper feed belt.

Click roller cleaning on the maintenance tab. Gently press down on the gray rollers to rotate the paper feed belt. Clean the paper feed roller.